Classroom Resources: Chemistry Basics


Filter by:

  1. Sort by:


1 – 25 of 155 Classroom Resources

  • Combustion, Chemical Change, Balancing Equations, Reaction Rate, Conservation of Mass, Conservation of Matter, Stoichiometry, Limiting Reactant, Chemical Change, Conservation of Matter, Conservation of Mass, Graphing, Error Analysis, Accuracy, Observations, Inferences, Interdisciplinary, Reaction Rate, Catalysts, Measurements, Mole Concept | High School

    Access is an AACT member benefit. Lesson Plan: Clean Air Chemistry

    In this lesson, students will learn about air pollution and some steps toward mitigating it. First, they will burn a candle and measure its mass and the concentration of CO2 over time. Students will discuss which data set they have more confidence in and why and then use stoichiometry to predict outcomes. Next, students explore incomplete combustion in a model-based worksheet that shows how a lack of O2 in the burning of fuels can produce air pollution. Students work together to interpret the models, define terms, and draw conclusions. Lastly, students work in groups using Lego models to illustrate how a catalytic converter works. They race “Nature” against catalysts “Palladium,” “Platinum,” and “Rhodium” to see what breaks down air pollution molecules fastest.

  • Quantitative Chemistry, Percent Composition, Measurements, Observations | High School

    Access is an AACT member benefit. Lab: Dehydration of Hydrated Salt

    In this lab, students are introduced to chemical measurement in a hands-on investigation using a heat source and a hydrated compound. Students will determine the percentage water lost, by mass, from a hydrated compound during the heating process. Additionally, students will analyze and interpret their results in a claim, evidence, reasoning format.

  • Observations, Physical Properties, Interdisciplinary | Middle School

    Access is an AACT member benefit. Lesson Plan: Fashionable Chemistry

    In this lesson, students will explore the characteristics of different types of natural and synthetic fabrics. Students will learn how synthetic fabrics are made and review the chemical formulas for various fabrics. Finally, students will demonstrate their knowledge by holding a chemistry fashion show.

  • Measurements, SI Units, Physical Properties, Observations | High School

    Lesson Plan: Setting the Standards of Excellence

    In this lesson, students will learn about standards through a reading about the National Institute of Standards and Technology (NIST), which is the U.S. body that defines standards. There are a series of activities to help promote literacy in the science classroom related to the reading. This lesson could be easily used as plans for a substitute teacher, as most of the activities are self-guided.

  • Heat, Temperature, Specific Heat, Law of Conservation of Energy, Enthalpy, Calorimetry, Exothermic & Endothermic, Balancing Equations, Chemical Change, Measurements, Mole Concept, Dimensional Analysis, Culminating Project, Interdisciplinary, Review, Graphing, Observations, Chemical Properties, Physical Properties | High School

    Access is an AACT member benefit. Project: Handwarmer Design Challenge

    In this project, students will use their knowledge of thermodynamics to design a handwarmer for a manufacturing company that can maintain a temperature of 30-40°C for at least 5 minutes and is designed for the average human hand. Students will create a final product after rounds of testing and an advertising poster that summarizes the results of their testing and promotes their design.

  • Density, Observations, Inferences | High School, Middle School, Elementary School

    Access is an AACT member benefit. Activity: Animation Activity: Density

    In this activity, students will use an animation to visualize density on the particulate level. There are opportunities to make qualitative and quantitative comparisons between substances.

  • Electron Transfer, Electrons, Electricity, Model of the Atom, Atoms, Subatomic Particles, Electrons, Observations | High School, Middle School

    Access is an AACT member benefit. Lesson Plan: Understanding Static Electricity

    In this lesson, students will complete a series of activities to explore how the imbalance of charges in materials creates static electricity and how those materials interact with others around them. They will describe the relationship between atomic structure, specifically the role of protons and electrons, and static electricity.

  • Identifying an Unknown, Observations, Physical Change, Physical Properties, Chemical Change, Chemical Properties, Solubility, Precipitate, Indicators | High School

    Access is an AACT member benefit. Lab: Using Qualitative Analysis to Identify Household Compounds

    In this lab, students will be introduced to common laboratory techniques, safety procedures, lab reagents, and terminology, all while identifying unknown household substances. Students will learn how to use qualitative analysis techniques as a systematic way to identify unknown materials. As part of this process, they will practice careful observation and documentation, as well as identifying relevant physical and chemical properties and changes, including solubility, color change, gas formation, and precipitation of solids.

  • Identifying an Unknown, Experimental Design, Chemical Properties, Physical Properties, Observations, Polyatomic Ions, Chemical Change, Ionic Bonding, Covalent Bonding, Solubility | High School

    Access is an AACT member benefit. Lab: Determining the Composition of Bridge Straw Stalactites

    In this lab, students will investigate “straws” that hang from a local bridge, and then determine various tests that can help to determine their chemical composition. Evaluating both the test results, as well as given information students will then make a claim about the composition, while providing evidence and supporting it with reasoning.

  • Physical Properties, Chemical Properties, Physical Change, Chemical Change, Observations | High School

    Access is an AACT member benefit. Lab: Determining Physical and Chemical Properties

    In this lab, students will determine the physical and chemical properties of several different substances through testing and observation. Additionally, they will further their understanding of chemical and physical changes, and their ability to recognize each type of change.

  • Physical Change, Chemical Change, Observations | Middle School, Elementary School

    Access is an AACT member benefit. Lab: Comparing Physical and Chemical Changes

    In this lab, students will analyze different scenarios in order to determine if a physical or chemical change has occurred. This lab experience will provide students with the opportunity to record observations, as well as improve their ability to differentiate between physical and chemical changes.

  • Physical Properties, Observations, Matter | Elementary School

    Access is an AACT member benefit. Lab: Investigating the Physical Properties of Everyday Items

    In this lab, students will collect and analyze ordinary, everyday items in order to learn more about physical properties. Students will record data about each item, and then classify their items according to their properties.

  • Scientific Method, Experimental Design, Observations, Lab Safety, Introduction, Graphing | High School, Middle School

    Access is an AACT member benefit. Lab: Applying the Scientific Method to Stain Removal

    In this lab, students will explore the real scientific process by designing an experiment to solve a problem. Students will learn about basic lab equipment, safety, and the scientific process of trial and error while solving a common problem: What color of food coloring requires the most bleach to remove?

  • Experimental Design, Scientific Method, Graphing, Observations, Lab Safety | High School, Middle School

    Access is an AACT member benefit. Lab: Mentos and Soda Investigations

    In this lab, students will design their own experiment in which they manipulate a variable that relates to Mentos and soda. Students will generate a testable question, design an experiment, collect and analyze the data and present their findings.

  • Heat of Vaporization , Boiling Point, Intermolecular Forces, Phase Changes, Heating Curve, Heat of Combustion, Temperature, Specific Heat, Observations, Chemical Change, Physical Change | High School, Middle School

    Access is an AACT member benefit. Demonstration: Cooking an Egg in Chemistry Class

    In this demonstration, students will observe the very high latent heat of vaporization for water by boiling water over a Bunsen burner in a paper cup to cook a boiled egg. The discussion can be extended to incorporate intermolecular forces to explain the unusually high boiling point of water, as well as heat of vaporization and specific heat capacity.

  • Scientific Method, Observations, Experimental Design, Physical Properties | Elementary School

    Access is an AACT member benefit. Lab: Stains, Stains, Go Away

    In this lab, students will become more familiar with the scientific method as they investigate what type of cleaning product is best. Students will identify variables as they carry out a controlled test to compare the ability of different products to remove a ketchup stain.

  • Solubility, Solute & Solvent, Precipitate, Mixtures, Error Analysis, Chemical Change, Physical Change, Observations, Identifying an Unknown, Graphing | High School, Middle School

    Access is an AACT member benefit. Lab: Chemicals, Chromatography, and Crime!

    In this lab, students will test “evidence” that has been collected from a crime scene. In order to determine if the victim was poisoned, students will perform a solubility and crystallization test on an unknown powder. Then, students will attempt to identify the culprit by using paper chromatography to analyze the lipstick from the potential criminals.

  • Scientific Method, Observations, Experimental Design | Middle School, Elementary School

    Access is an AACT member benefit. Lab: Introducing the Scientific Method

    In this lab, students will be introduced to and become familiar with the scientific method. They will apply their understanding by following the steps of the scientific method while investigating the amount of fat in potato chips.

  • Activity Series, Balancing Equations, Predicting Products, Chemical Change, Chemical Change, Observations | High School

    Access is an AACT member benefit. Lab: Activity Series of Unknown Metals

    In this lab, students will create an activity series of metals from a series of reactions involving unknown metals. They will then compare their activity series and a list of metals used in this lab (supplied by the teacher after data collection) to a published activity series to identify the unknown metals.

  • Observations, Mixtures, Chemical Change, Physical Change, Chemical Change, pH | Elementary School

    Access is an AACT member benefit. Demonstration: The Chemistry of Cheese

    In this demonstration, students will observe the chemical process that occurs when making cheese. Students will be become more familiar with fundamental chemistry terms while making important observations.

  • Activity Series, Electrons, Electron Transfer, Balancing Equations, Predicting Products, Chemical Change, Chemical Change, Observations | High School

    Access is an AACT member benefit. Activity: Simulation Activity: Metals in Aqueous Solutions

    In this activity, students will run simulated tests of various metals in aqueous solutions to determine the relative reactivity of these metals. A total of eight metals will be observed in various combinations with the corresponding metal nitrate solutions and hydrochloric acid. Students will interpret the data collected to construct an activity series of the elements used in this simulation.

  • Activity Series, Chemical Change, Electrons, Electron Transfer, Balancing Equations, Chemical Change, Predicting Products, Observations, Acid Base Reactions | High School

    Simulation: Metals In Aqueous Solutions

    In this activity, students will run simulated tests of various metals in aqueous solutions to determine the relative reactivity of these metals. A total of eight metals will be observed in various combinations with the corresponding metal nitrate solutions and hydrochloric acid. Students will interpret the data collected to construct an activity series of the elements used in this simulation.

  • Molecular Motion, Temperature, Observations, Inferences | Elementary School

    Access is an AACT member benefit. Demonstration: How Does Temperature Affect Water Molecules?

    In this demonstration, students will observe models to better understand that temperature affects molecular movements.

  • Predicting Products, Activity Series, Chemical Change, Chemical Change, Observations | High School

    Access is an AACT member benefit. Project: Wastewater Recovery

    In this project, students will analyze test results in order to design a procedure for recovering certain metals from wastewater using their knowledge of the Activity Series of Metals and single replacement reactions. Based on their analysis, students will create a proposal for presentation in an effort to recommend the best plan for reclaiming the metals from the wastewater.

  • Chemical Change, Scientific Method, Experimental Design, Observations, Inferences | Middle School, High School

    Access is an AACT member benefit. Demonstration: What Causes Yeast to Ferment?

    In this lesson, students will observe and verify molasses sugar content as a result of its ability to ferment yeast. They will compare how molasses allows yeast to ferment with other sugar solutions as well as a sugar-free solution.

Filtered By

Subtopics: Observations

Clear All Filters

Available Filters