Classroom Resources: Solutions
Filter by:
1 – 25 of 26 Classroom Resources
-
Chemistry Basics, Identifying an Unknown, Solubility, States of Matter, Melting Point, Phase Changes, Acids & Bases, pH, Strong vs Weak, Observations, Molecular Motion | High School
Activity: Simulation Activity: Identifying Unknowns with Safety Data Sheets Mark as Favorite (2 Favorites)
In this activity, students will use a simulation to learn about some of the sections of a safety data sheet (SDS) and how the information on SDSs can be used not only for safety purposes but also for identifying unknowns. Specifically, students will use “Section 9: Physical and Chemical Properties” to distinguish between two or three substances with similar appearances in a variety of lab-based scenarios. Particle diagrams are also included to help students visualize the substances’ behavior on a particulate level.
-
Concentration, Solute & Solvent | High School
Activity: Why Does Concentration Matter? Mark as Favorite (0 Favorites)
In this activity, students will analyze a drinking water quality report from Washington, D.C. or from their city. Students will apply their knowledge of solutions and concentration in order to answer a series of questions using real-world data.
-
Chemistry Basics, Physical Properties, Physical Change, Observations, Identifying an Unknown, Lab Safety, Molecules & Bonding, Covalent Bonding, Ionic Bonding, Intermolecular Forces, Molecular Motion, Conductivity, States of Matter, Melting Point, Intermolecular Forces, Molecular Motion | High School
Activity: Animation Activity: Physical Properties and Particle Interaction Mark as Favorite (7 Favorites)
In this activity, students will view an animation that explores the relationship between physical properties and particle-level interactions. Particle diagrams of common household substances are used to illustrate that forces of attraction influence melting points. Similarly, particle diagrams of the same substances dissolved in water are used to compare their conductivity in solution.
-
Concentration, Solubility, Molarity, Chemistry Basics, Graphing | High School
Activity: Concentration and Solubility Mark as Favorite (21 Favorites)
In this activity, students will use news articles and EPA publications to compare Federal drinking water regulations to the concentrations found in Flint, Michigan. Students are introduced to the unit parts per billion (ppb) and compare it both conceptually and mathematically to molarity. As a group, students use data to compare the solubility of various lead salts and perform solubility calculations.
-
Solubility, Net Ionic Equation, Precipitate | High School
Activity: Corrosion and Precipitation Mark as Favorite (6 Favorites)
In this activity, students will investigate concepts of corrosion and redox as they consider the Flint, Michigan Water Crisis and the question, “How did the lead get into Flint’s drinking water?” As they explore these topics while also considering solubility, students will begin to understand how corrosion control is used to prevent lead from contaminating a drinking water supply.
-
Solubility, Solubility Rules, Solute & Solvent, Intermolecular Forces, Chemical Bond, Ionic Bonding, Covalent Bonding, Polarity, Intermolecular Forces, Intramolecular Forces | Middle School, High School
Activity: Animation Activity: Solubility Mark as Favorite (15 Favorites)
In this activity, students will view an animation that explores how ionic and molecular compounds dissolve (or don’t) in water. They will see that if an ionic compound such as salt dissolves, the ions dissociate, whereas the molecules in a molecular compound such as sugar remain intact but are separated from one another by water molecules. They will also see that some ionic compounds such as chalk do not dissolve, and the cations and anions remain stuck together.
-
Net Ionic Equation, Precipitate, Solubility, Solubility Rules, Balancing Equations | High School
Activity: Animation Activity: Net Ionic Equations Mark as Favorite (11 Favorites)
In this activity, students will view an animation that explores what happens in a precipitate reaction on the particulate level. They will see why writing a net ionic equation accurately represents what happens in these scenarios. An example of diluting a soluble solid, mixing two aqueous reactants that yield aqueous products, and mixing two aqueous reactants that yield a precipitate are part of this animation.
-
Colligative Properties, Boiling Point Elevation, Freezing Point Depression, Concentration, Solute & Solvent, Boiling Point, Freezing Point, Phase Changes, Molecular Motion, Graphing, Physical Properties, Heat, Temperature | Middle School, High School
Activity: Simulation Activity: The Effect of Solutes on Boiling and Freezing Point Mark as Favorite (29 Favorites)
In this activity, students will use a colligative properties simulation to investigate the effects of different solutes, and different amounts of those solutes, on the boiling point and freezing point of a solution. Students will see particle-level animations of boiling and freezing with different types and amounts of solutes, as well as graphical representations of the results of each trial.
-
Solubility Rules, Solubility, Ionic Bonding, Predicting Products | High School
Activity: Solubility Rules Dice Game Mark as Favorite (35 Favorites)
In this activity, students will use ion dice to form a number of different ionic compounds. Based on the resulting ionic compound, they will use a solubility chart to determine if it is soluble or insoluble. This game will allow students to become more familiar with ionic compounds and solubility rules.
-
Polymers, Molecular Structure, Molecular Structure , Polymers, Solubility | High School
Activity: Ingenious: How Science Is Fixing Recycling's Grossest Problem Video Questions Mark as Favorite (4 Favorites)
In this activity, students will answer questions while watching the video, How Science is Fixing Recycling’s Grossest Problem, from the Ingenious series produced by the American Chemical Society. Each episode investigates a different topic related to how leading-edge chemistry is taking on the world’s most urgent issues to advance everyone’s quality of life and secure our shared future. This episode investigates the stinky problems associated with polypropylene recycling. Current polypropylene recycling techniques are more down-cycling than re-cycling, but a new technique, called dissolution recycling, is changing all that.
-
Galvanic Cells, Reduction Potentials, Redox Reaction, Half Reactions, Electrons, Electron Transfer, Anode, Cathode, Oxidation, Reduction, Concentration, Net Ionic Equation, Molarity, Nernst Equation | High School
Activity: Simulation Activity: Non-Standard Galvanic Cells Mark as Favorite (9 Favorites)
In this activity, students will use a simulation to create a variety of non-standard condition galvanic/voltaic cells. This simulation allows students to choose the metal and solution for each half cell, as well as the concentration of those solutions. Students will build concentration cells and other non-standard cells and record the cell potential from the voltmeter. They will compare the results of different data sets, write net ionic equations, and describe electron flow through a galvanic/voltaic cell from anode to cathode as well as the direction of migration of ions, anions towards the anode and cations towards the cathode.
-
Galvanic Cells, Reduction Potentials, Redox Reaction, Half Reactions, Cathode, Anode, Oxidation, Reduction, Electrons, Electron Transfer, Net Ionic Equation | High School
Activity: Simulation Activity: Galvanic/Voltaic Cells Mark as Favorite (33 Favorites)
In this activity, students will use a simulation to create a variety of galvanic/voltaic cells with different electrodes. They will record the cell potential from the voltmeter and will use their data to determine the reduction potential of each half reaction. Students will also identify anodes and cathodes, write half reaction equations and full chemical equations, and view what is happening in each half cell and the salt bridge on a molecular scale.
-
Solubility, Intermolecular Forces, Molarity | High School
Activity: Solutions Escape Room Mark as Favorite (74 Favorites)
In this activity, students will review concepts covered in a solutions unit. They will complete problems in order to determine codes that will allow them to advance through stages of a Google Form, which is set up as an escape room. This activity is designed to be used at the end of a unit, or as an alternate to an exam, particularly in a virtual environment.
-
Physical Properties, Covalent Bonding, Electronegativity, Polarity, Molecular Geometry, Intermolecular Forces, Solubility | Middle School, High School
Activity: The Chemistry of Water Video Questions Mark as Favorite (40 Favorites)
In this lesson, students will watch a video and answer questions about how the molecular geometry and polarity of water give rise to many of its unusual physical properties, including its relatively high boiling point and its ability to dissolve some substances but not others.
-
Ionic Bonding, Naming Compounds, Molecular Formula, Ions, Ionic Radius, Solubility, Melting Point, Physical Properties | High School
Activity: My Name is Bond, Ionic Bond Mark as Favorite (63 Favorites)
In this lesson, students will demonstrate their knowledge of ionic bond strength using a “brackets” activity. Pairs of students start the activity playing a game of “Ionic Compound War” to build eight compounds. Then then transfer the compounds to a “bracket” and use their knowledge of ionic bonding, along with a solubility chart, to predict the strongest and weakest bond between four pairs of ionic substances.
-
Ionic Bonding, Naming Compounds, Molecular Formula, Ions, Ionic Radius, Solubility, Melting Point, Physical Properties | High School
Activity: Ionic Bonding Brackets Mark as Favorite (51 Favorites)
In this lesson, students will demonstrate their knowledge of ionic bond strength and its relationship to the properties of melting point and solubility using a “brackets” activity. After analyzing the ionic charge and radius to predict the strongest and weakest bond between four pairs of ionic substances, they will then determine which will be the least soluble.
-
Electromagnetic Spectrum, Molecular Structure, Mixtures | Middle School, High School
Activity: What are Pigments? Video Questions Mark as Favorite (5 Favorites)
In this activity, students will watch a video and answer related questions about the chemistry of pigment molecules and how they are used to give paints their specific color. During the video, students will learn about the importance of a pigment’s molecular structure, how they are physically suspended to create a paint color, as well as how they interact with light.
-
Mixtures, Solute & Solvent, Intermolecular Forces, Intermolecular Forces, Molecular Structure, Polymers, Electromagnetic Spectrum | Middle School, High School
Activity: What is Paint? Video Questions Mark as Favorite (10 Favorites)
In this activity, students will watch a video and answer related questions about the composition of paint. During the video, students will learn about the differences between three common paint types, water colors, oil-based and acrylic paint as well as the chemistry of each.
-
Molarity, Concentration, Solute & Solvent | High School
Activity: Simulation Activity: Preparing Solutions Mark as Favorite (30 Favorites)
In this simulation, students will complete a calculation in order to determine the value of an unknown variable related to a described solution and then they will observe an animation of the solution being prepared. The calculation will require the student to determine either the molarity of solution, volume of solution, or mass of solute needed. Additionally the associated particle diagram for the solution will be displayed to help students better visualize the solution at the particulate level. Finally, students will gain familiarity with the proper lab techniques for preparing a solution as they are lead through a step-by-step animated process demonstrating this procedure. The simulation is designed as a five question quiz for students to use multiple times.
-
Classification of Reactions, Balancing Equations, Solubility Rules, Activity Series | High School
Activity: Simulation Activity: Predicting Products Mark as Favorite (62 Favorites)
In this simulation, students will reference an activity series and a solubility chart to accurately predict the products of single replacement and double replacement chemical reactions. Associated particle diagrams will be displayed to help students better comprehend the reaction at the particulate level. Students will also be asked to balance the chemical equation. The simulation is designed as a five question quiz for students to use multiple times.
-
Solubility, Solute & Solvent, Intermolecular Forces, Covalent Bonding, Polarity, Intermolecular Forces | High School
Activity: T-Shirt Chromatography Mark as Favorite (45 Favorites)
In this activity, students will learn about solubility, saturation, polarity, and intermolecular forces through chromatography techniques.
-
Solute & Solvent, Intermolecular Forces, Solubility | Middle School, High School
Activity: Basic Modeling of the Dissolving Phenomenon Mark as Favorite (50 Favorites)
In this activity, students explore the process of salt dissolving in water using cut-outs of ions and water molecules to model interactions between them. They then use their model to make a prediction about the relative solubility of salt in isopropyl alcohol compared to the solubility in water and design an experiment to test their prediction.
-
Solubility, Solute & Solvent, Intermolecular Forces | Middle School, High School
Activity: Advanced Modeling of the Dissolving Phenomenon Mark as Favorite (29 Favorites)
In this activity students build a model of sodium chloride based on their own knowledge of ionic compounds. Then they construct a model of the interactions between water and their salt model to develop an understanding of what caused the salt to dissolve. After refining their models based upon class discussions and critiques, students then construct a model of the interaction between salt and a different solvent, alcohol. Using their models, students make predictions as to which solvent (water or alcohol) would be better at dissolving the salt. Finally students design an experiment to test their prediction. As an extension, students are asked to use their solubility models to explain why calcium carbonate will not dissolve in water, even though it is also an ionic compound.
-
Molarity, Concentration, Molality | High School
Activity: Particle Level Molarity Mark as Favorite (84 Favorites)
In this activity, students are introduced to molarity at the particle level. Students will activate their prior knowledge by demonstrating their understanding of concentration by preparing several Kool-Aid drinks, and then applying that information at the particle level to various models.
-
Solute & Solvent, Molarity, Tyndall Effect, Concentration, Stoichiometry, Dimensional Analysis, Mole Concept | High School
Activity: Solubility & Solutions Mark as Favorite (21 Favorites)
In this inquiry activity, students investigate types of solutions, identifying the solute and solvent, and classifying each solution. They them solve stoichiometry problems involving solutions of different concentrations.